Enter/Exit Programming Mode
224
PowerScan™ PD9330/PBT9300/PM9300
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good
transmission as soon as
the Base Station receives a label
• ACK when sent to host — scanner sign
als a good transmission as soon
as the Base Station has sent the label to the host
• ACK from host — scanner signals a go
od transmission as soon as the
Base Station has sent the label to the host and host has replied with an
acknowledge message.
ACK from cradle
ACK when sent to host
ACK from host
ACK from host works only for RS-232 or USB-COM interfaces with ACK/NACK dis-
abled. If ACK from host is configured with any other interface conditions, it works
l
ike ACK when sent to host. See
"Message Formatting"
on page 283 for details.
For this feature to be operational, the scanner must be set to Ignore Host Com-
mands (see
page 23
).
Radio Sleep
This feature disables the radio when the scanner is in standby mode in order
to save the battery power. When Radio sleep is enabled, the scanner cannot
receive asynchronous messages nor paging button requests from the base.
The scanner is still able to receive ACK From Host message. See Transmit
mode.
Sleep Disable
Sleep Enable
DEFAULT
To Next Page
Loading...
Need help?
General
