Enter/Exit Programming Mode
Product Reference Guide
235
ACTION CONFIGURATION FOR FUNCTION KEYS
Configure actions (up to three for 4K model when configured with "Function
Keys Action Select Mode") for the function keys
Configure Actions for F1
F1 No Actions Configured
Configures Action for F1
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code for
the Func
tion Key you want to program. Next scan 4 dig-
its from the Alphanumeric characters in
Appendix D,
Keypad
.
The first digit must be 0, the second is used by 4K and
16K model, the remaining third and fourth are used
only by 4K model. Second, third and fourth digit must
be configured according to the CMD_ID numbers in
Table 27 on page 253. Confirm the inserted value by
scanning the ENTER/EXIT bar code.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
Configure Actions for F2
F2 No Actions Configured
To Next Page
Loading...
Need help?
General
