Datalogic PM9300 User Manual

Enter/Exit Programming Mode
Product Reference Guide 31
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep
sequence upon receiving a Not-On-File (NOF) host command.
$CBPNF0
Beep On Not On File = Disable
DEFAULT
Beep On Not On File = Enable
ACK NAK Options
This enables/disables the ability of the reader to support the RS-232 ACK/
NAK protocol. 
See page 257 for more information.
DEFAULT
$CR2AE00
ACK/NAK Protocol = Disable ACK/NAK
$CR2AE01
ACK/NAK Protocol = Enable for label transmission
$CR2AE02
ACK/NAK Protocol = Enable for host-command
acknowledge
$CR2AE03
ACK/NAK Protocol = Enable for label transmission and
host-command acknowledge

Datalogic PM9300 Specifications

General

Brand	Datalogic
Model	PM9300
Category	Barcode Reader
Language	English