Datalogic PowerScan PBT9500 Software Reference Guide

BC9180™ Startup and Connection to Ethernet Net-
Ethernet Software Reference Guide 7
Figure 3 . Webserver configuration screen
After selecting the desired parameter, click Apply to finish the configura-
tion. The cradle will be reset and then start up
with the new configured
parameter.
SelectingaNon‐Ethernetinterface
Selecting a non-Ethernet interface should not be needed in any Ethernet
application, but if you want do it for service purposes, download
the
Quick Reference Guide (QRG) from
the Datalogic website.
To restore the Ethernet interface, scan the bar code
below.
NOTE
ETHERNET FEATURES
Ethernet Host interface
Select Ethernet Standard Interface
Set
Ethernet
Standard Features
starting on
page 16
Unlike some programming features and options, interface selections
require that you scan only one programming bar code label. DO NOT scan an
ENTER/EXIT bar code prior to scanning an interface selection bar code.
For other interfaces, you can download the Product Reference Guide
(PRG) or Quick Reference Guide (QRG) on the Datalogic website:
www.datalogic.com.
NOTE
The default interface for the BC9180™ base station/charger is Ethernet
Standard.

Datalogic PowerScan PBT9500 Specifications

General

Type	Handheld bar code reader
Wavelength	680 nm
Sensor type	Laser
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 40 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Battery life	10 h
Charging time	4 h
Battery capacity	2150 mAh
Power source type	Battery
Number of reads per charge	30000
Number of batteries supported	1
Wireless range	100 m
Operating frequency	2400 - 2480 MHz
Standard interfaces	USB, RS-232
Connectivity technology	Wired & Wireless
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Buzzer	Yes
Certification	IEC 62471 Class 1 LED
Product color	Black, Yellow
Protection features	Shock resistant, Water resistant
International Protection (IP) code	IP65
Cables included	RS-232

Weight and Dimensions

Depth	74 mm
Width	110 mm
Height	212 mm
Weight	380 g