Datalogic PowerScan PBT9500 Software Reference Guide

Ethernet Software Reference Guide 1
Chapter 1
Introduction
About this Manual
This Ethernet Software Reference Guide (SRG) is provided for users seek-
ing advanced technical information related to the BC9180™ Ethernet
Base
Station/Charger, including connection, programming, maintenance and
specifications. The Quick Reference Guide (QRG) or other publications
associated with this product are downloadable free of charge from the
website listed on the back cover of this manual.
Manual Conventions
The following conventions are used in this document:
The symbols listed below are used in this manual to notify the reader of
key issues or procedures that mu
st be observed when using the
BC9180™ base station/charger:
NOTE
Notes contain information necessary for properly diagnosing,
re
pairing and operating the
BC9180™ base station/charger.
CAUTION
The CAUTION symbol advises you of acti
ons that could damage
equipment or property.

Datalogic PowerScan PBT9500 Specifications

General

Type	Handheld bar code reader
Wavelength	680 nm
Sensor type	Laser
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 40 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Battery life	10 h
Charging time	4 h
Battery capacity	2150 mAh
Power source type	Battery
Number of reads per charge	30000
Number of batteries supported	1
Wireless range	100 m
Operating frequency	2400 - 2480 MHz
Standard interfaces	USB, RS-232
Connectivity technology	Wired & Wireless
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Buzzer	Yes
Certification	IEC 62471 Class 1 LED
Product color	Black, Yellow
Protection features	Shock resistant, Water resistant
International Protection (IP) code	IP65
Cables included	RS-232

Weight and Dimensions

Depth	74 mm
Width	110 mm
Height	212 mm
Weight	380 g