Datalogic PowerScan PBT9500 - Ethernet Host Interface Operation; Service: Telnet; Service: Data Socket

Ethernet Software Reference Guide 9
Chapter 3
Ethernet Host Interface Operation
When Ethernet Host Interface is selected as the active interface and the sys-
tem startup is completed, a label received from the Handheld wireless reader
will be
transmitted to the Host on multiple TCP/IP-based services concur-
rently. This will occur only to
the ones having at least one client connected
to them in order to preserve resources (see below).
Service: Telnet
Telnet is a bidirectional interactive text-oriented communication protocol.
The host can receive label data with WINTERM (or other TELNET-ready appli-
cation) and send Datalogic Service Port Comma
nds/ Host Commands.
NOTE
BC9180™ only supports
1 Telnet client running at the same time.
Service:DataSocket
Data Socket is a point-to-point bidirectional communication channel avail-
able for Ethernet communication; it is the BC9180™ internal instance of a
standard TCP-IP socket.
NOTE
BC9180™ only supports 1 Data Socket client running at the same time.