Datalogic PreScan - Fixed Scanner Requirements; Pos;Interface

Basic Setup
Advanced Configuration Guide 7
Fixed Scanner Requirements
A new or existing Magellan scanner to be used as a part of the
PreScan system must be one of the PreScan-compatible Magellan
models listed in the table below. It can be ordered with the
PreScan application preinstalled, or manually upgraded with the
necessary firmware. See "Technical Support" on page 4 to request
assistance.
POS/Interface
The fixed scanner must use flow control to manage the flow of data being sent by the PreScan
system. The table below lists Magellan interface capabilities with regard to flow control.
PreScan-COMPATIBLE Models
Magellan 9500 Magellan 8200
Magellan 8500 Magellan 8100
Magellan 8500Xt Magellan 2300HS
Magellan 8500XtS Magellan 2200VS
Magellan 8400 Magellan 2200 Enhanced
Magellan 8300 Magellan 2300 Enhanced
NOT COMPATIBLE with PreScan
HS1250 Magellan 1000i
VS1200 Magellan 1100i
VS1000 Magellan 1400i
Magellan SL
MAGELLAN INTERFACE Supports Flow Control
IBM USB YES
IBM 46xx YES
Wincor/Nixdorf RS-232 Mode B YES
Wincor/Nixdorf RS-232 Mode A (Standard) YES
RS-232 with CTS/RTS YES
OPOS / JPOS controlled YES
RS-232 no flow control NO
Keyboard Wedge NO
Keyboard USB NO