Datamax MP Compact4 Mark II

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 111
STX KQ Query Memory Configuration
This command causes the printer to transmit, in a model-dependent format, its memory
configuration (i.e., total amount installed, amount available for configuration, and
amount currently assigned to specific functions or entities) to the host device.
Syntax:
<STX>KQ<CR>
Non-Display model
response format:
INTERNAL MEMORY<CR>
VER: aa-cdd.ee mm/dd/yy<CR>
INSTALLED: iiii<CR>
AVAILABLE: vvvv<CR>
MODULE: X:xxxx<CR>
SCALABLE: ssss<CR>
LABEL MEM: LLLL<CR>
LABEL SIZE: wwww:gggg:oo<CR>
<CR>
-
ASCII Carriage Return (0x0D) delimiter.
aa-cdd.ee mm/dd/yy
-
ASCII string sequence that represents
the firmware version number string.
iiii
-
The number of 4KB blocks of DRAM
memory.
vvvv
-
The number of 4KB blocks of DRAM
available for configuration.
X:
-
ASCII character identifying a DRAM
module followed by an ASCII colon (:). If
no Internal Module is present, this field
and its associated legend will not appear.
xxxx
-
The number of 4KB blocks of DRAM
allocated as an Internal Module.
ssss
-
The number of 4KB blocks of DRAM
assigned to the smooth scalable font
processor cache.
LLLL
-
The number of 4KB blocks of DRAM
assigned to label print buffer.
wwww
-
Current maximum printable label width
(in 100
ths
of an inch or millimeters).
gggg
-
Current printable length (in 100
ths
of an
inch or millimeters), 200 min. / 640 max.
Where:
oo
-
Current label dimension unit’s
designation: “IN” for inches or “MM” for
millimeters.