Datamax MP Compact4 Mark II

System-Level Command Functions
32 Class Series 2 Programmer’s Manual
STX v Request Firmware Version
This command causes the printer to send its version string (same as printed on the
configuration label). The version may be different from printer to printer.
Syntax:
<STX>v
Printer Response:
VER: H-4212–11.04 01/01/2008<CR>
STX W Request Memory Module Information
This command requests a memory module directory listing. Results may vary depending
on printer class, model, or firmware version.
Syntax:
<STX>W[b][c]a
Where:
b s
optional – list file size also
c e
optional – list file extension also
a -
Data type:
F
G
L
C
X
N
M
f
p
*
=
=
=
=
=
=
=
=
=
=
Downloaded fonts
Graphics (Image)
Label formats
Configuration files
Menu language files
Plug-ins
Miscellaneous type files
Resident fonts
Entire module contents
All types
Sample:
<STX>WF
Printer response
(using an H-Class):
MODULE: D<CR>
S50 92244ttf50<CR>
AVAILABLE BYTES: 945152<CR>
MODULE: G<CR>
AVAILABLE BYTES: 852480<CR>
MODULE: X<CR>
AVAILABLE BYTES: 852480<CR>
MODULE: Y<CR>
AVAILABLE BYTES: 852480<CR>