Datamax MP Compact4 Mark II Programmer's Manual

Extended System-Level Command Functions
116 Class Series 2 Programmer’s Manual
STX KtE Write Electronic Article Surveillance (EAS) Bit
(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)
This command writes the EAS bit for Philips ISO tags.
Syntax:
<STX>KtEabcc
a
- The number of retry attempts, 0-9.
b
- Electronic Article Surveillance (EAS) option:
0 = Set EAS
1 = Reset EAS
2 = Test EAS
Where:
cc
- Two character Manufacturer’s Code, representing one
byte.
Sample:
<STX>KtE9004[CR]
The sample above writes the EAS bit for Philips (0x04), retrying
nine times if necessary.
STX KtH Read and Feedback Tag Information to Host
(Direct Mode – HF [13.56 MHz] ISO15693 Tag Interface)
This command returns the tag info to host.

This command only works when the Data Flag for the tag is 0x0F (i.e., when the tag
contains DSFID, AFI, VICC and IC data).
Syntax:
<STX>KtH
Sample Feedback:
DATA FLAG: 0x0F
TAG ID: E004010000751412
DSFID: 0xE3
AFI: 0x01
NUM BLK: 0x1B
BLK SIZ: 0x03
IC REF: 0x01

Datamax MP Compact4 Mark II Specifications

General

Brand	Datamax
Model	MP Compact4 Mark II
Category	Printer
Language	English