Appendix K –Maximum Row, Column, & Character Values; Print Resolutions & Widths; and, Module Identifiers & Allocations
272 Class Series 2 Programmer’s Manual
Memory Module Identifiers and Allocations
Printer
Module ID
Description
E-Class
Mark III
(Basic &Adv)
E-Class
Mark III
(Pro)
A-Class
MP Compact
Mark II
EX2
E-Class &
Mark II
I-Class
H-Class
M-4206
Mark II
M-4210 &
4308
Mark II
A DRAM (512 KB - default size)
X X
B
[1]
Flash (512 KB available to user)
X X
C
Default, as assigned by <STX>X
X
X
X X X X X X
DRAM (512 KB - default size), configurable.
X X
[6]
DRAM (default 1MB), configurable.
X X
X
X
X X X X
SDIO
X
[8]
X
F
4 MB Flash option (as equipped)
[4]
X
256 KB Flash, Main CCA
[2]
X X
512 KB Flash, Main CCA, configurable up to 6.5 MB with Flash option
[3, 4]
X
≈ 1.0 MB Flash, Main CCA
[4, 5]
X
X X
≈ 4.0 MB Flash, Main CCA
[4, 5]
X
[7]
X
G
48 MB, Main CCA
H USB Host Ports (as equipped)
X
X
[8]
X X
I USB Host Ports (as equipped)
X
[8]
X X
J 64 MB option (as equipped)
X
X ILPC Module, configurable 256 KB to 4 MB (as equipped).
X
[5]
X
[5]
X
[3,4]
X
[5]
64 KB Flash – Menu / EFIGS – protected
X
Y
128 KB Flash – Menu / EFIGS – protected
X
[5]
X
[5]
X
X
[5]
X
[5]
Z
[4]
4 MB Flash – Option ILPC – protected
X
[1]
≈100,000 writes for semi-or-permanent data storage, dependent upon options and available memory; see the configuration label or <STX>KC.
[2]
Not available for the I-4206 and I-4208.
[3]
Modules G and X are partitioned to equal the sum of the total space available.
[4]
Configurable; see <STX>KcMCC.
[5]
Modules X and Y are factory allocated and locked; memory is shared with Module G.
[6]
Reduced to 128KB when MCL equipped.
[7]
Size dependant on main board flash and options installed, up to 4MB.
[8]
Optional for A-Class Mark II models only.
Table K-4: Memory Module Identifiers and Default Memory Allocations
To Next Page
Loading...
Need help?
General