Appendix G – Bar Code Details
Class Series 2 Programmer’s Manual 225
DPL field record, QR Code bar code, Cell Size = 0.08 inch square, positioned at X =
.1” and Y = .1”, ECC = L, Mask = Automatic, Data Input Mode = Manual - Kanji:
1W1D88000001000102,LM,K<0x81><0x40><0x81><0x41><0x81><0x42><0x0D>
DPL field record, QR Code bar code, Cell Size = 0.04 inch square, positioned at X =
.1” and Y = .1”, ECC = L, Mask = Automatic, Data Input Mode = Manual - Kanji (in
Hex/ASCII format):
1W1D4400000100010L8m,K814081418142<0x0D>
DPL field record, QR Code bar code, Cell Size = 0.01 inch square, positioned at X =
.1” and Y = .1”, ECC = M, Mask = Automatic, Data Input Mode = Automatic:
1W1d1100000100010Pallet 35FGA, Box 55367, Datamax Corp, Orlando,
Florida 32707<0x0D><0x0D>
W1f / W1F: Aztec
Valid Characters: All ASCII characters, depending upon the selected options.
Variable Length (W1f): This two dimensional bar code holds a large amount of data in a
small area and can provide a high level of error checking.
Specified Length (W1F): With a string four-digit length specifier, values 0x00 through
0xFF to be included within the data strings without conflicting with the DPL format
record terminators.
Syntax (spaces added for readability):
a W1 b c d eee ffff gggg [hhhh] i jjj kk…k
Where:
To Next Page
Loading...
