To Next Page

To Previous Page

System-Level Command Functions

30 Class Series 2 Programmer’s Manual

The sample above produces three labels. The first is formatted

with the commands between <STX>L and E. The next two labels

print with the replacement data contained in the <STX>U

commands (see <STX>E and <STX>G). The bar code is the same

length: 3 digits and nine spaces.

Truncated Length Replacement Field Functions – A variant of the <STX>U command

includes the truncate option “T”, where dynamic data shorter than the originally defined

field length will not

be padded and the original maximum field length is maintained for

subsequent replacements.

Syntax:

<STX>UTnnss…s<CR>

Where:

Is the format field number, 2 digits.

Truncate option

ss…s

Is the new string data, followed by a <CR>.

Truncated Sample:

<STX>L

1A1100001000100data field 1<CR>

161100001100110data field 2<CR>

161100001200120data field 3<CR>

Q0001

<STX>E0002

<STX>G

The sample above produces three labels. The first is formatted

with the commands between <STX>L and E. The next two labels

print with the replacement data contained in the <STX>U

commands (see <STX>E and <STX>G). The bar code is shortened;

it only has three digits (and no spaces).

Datamax MP Compact4 Mark II Programmer's Manual

Other manuals for Datamax MP Compact4 Mark II