Extended System-Level Command Functions
72 Class Series 2 Programmer’s Manual
(LE) Legacy Emulation – This command enables the <STX>O and <STX>f print
positioning commands to allow backward compatibility with label formats that were
designed for the Allegro
®
Prodigy
®
, and Prodigy Plus
®
(If the printer is Display-
Equipped, also Prodigy Max
®
emulation).
Use causes the printer to ignore Label commands A, M, n, and T.
(LR) Label Rotation – This command sets label rotation, allowing formats to be
flipped 180 degrees.
(LS) Language Select – This command selects the language for the menu system
messages and configuration label. Only languages that are resident will be available.
Language name limited to a twenty character maximum.
(LM) Label Store – This command selects the level of stored format recall to
include the label-formatting command fields, or the label-formatting command fields
and the printer state.
(LW) Label Width – This command sets the maximum limit for the printable width.
Objects extending beyond this limit will NOT print; see Appendix K. (For Non-Display
models also see the <STX>KW command.)
The EX2 requires this command prior to the start of the label format command
(<STX>L).
To Next Page
Loading...
Need help?
General