Datascope Accutorr Plus - Electromagnetic Compatibility

Accutorr Plus Service Manual 0070-10-0691 2 - 9
Specifications Electromagnetic Compatibility
Drop and Impact ECRI PB 29689:1979
EMC IEC 60601-1-2:2001
Magnetic Fields EN 61000-4-8:1993 +A1:2001
Voltage Dips EN 61000-4-11:2004
Volt Change, Fluctuations, Flicker EN 61000-3-3:1995 +A1:2001 +A2:2005 +IS1:2005
Conducted Immunity EN 61000-4-6:1996 +A1:2001 +A2:2006
Radiated Immunity EN 61000-4-3:2006
ESD EN 61000-4-2:1995 +A1:1998 +A2:2001
EFT EN 61000-4-4:2004
Surge EN 61000-4-5:2006
Radiated and Conducted Emissions EN 55011:1998 +A1:1999 +A2:2002
Harmonic Emissions EN 61000-3-2:2000 +A1:2001 +A2:2005
2.7 Electromagnetic Compatibility
The Accutorr Plus has been tested and found to comply with the requirements of IEC
60601-1-2: 2001 “Collateral Standard Electromagnetic Compatibility Requirements and
Tests.”
To ensure Electromagnetic Compatibility (EMC), operate the Accutorr Plus in accordance
with the instructions for use.
To prevent the possibility of other equipment affecting the Accutorr Plus, insure adequate
distances are maintained between devices.
To Purchase, Visit Avobus.com or call 1-800-674-3655