Daub DR Robot Variomatic - English

DR Robot Variomatic | User manual www.daub.nl36
TABLE OF CONTENTS
1. Introduction 37
1.1. Intended readers 37
1.2. Symbols in this manual 37
1.3. Terminology 37
1.4. Contact information 37
2. Machine description 38
2.1. Intended and unintended use 38
2.2. Description of operation 38
2.3. Main components 38
2.4. Control panel 40
2.5. Working environment 41
2.6. Specications 42
2.7. Warranty 43
2.8. Conformity 43
3. Safety 44
3.1. Safety provisions 44
3.2. Safety symbols and markings on
the product 44
3.3. Personal protective equipment 44
3.4. Safety instructions 45
4. Transport and storage 47
4.1. Safety instructions 47
4.2. Transporting the machine 47
4.3. Storing the machine 47
5. Installation 48
5.1. Safety instructions 48
5.2. Unpacking the machine 48
5.3. Positioning the machine 48
5.4. Connecting the machine 49
6. Commissioning 50
6.1. Safety instructions 50
6.2. Checking rounding plates 50
6.3. Checking oil level in hydraulic tank 50
6.4. Checking electrical connection 50
6.5. Switching on the machine 50
6.6. Checklist 50
7. Use 51
7.1. Safety instructions 51
7.2. Selecting a program 51
7.3. Placing the dough on the rounding
plate 52
7.4. Placing the rounding plate in the
machine 52
7.5. Starting the rounding process 53
7.6. Saving a program 53
7.7. Assessing the result 53
7.8. Changing the dividing disc 54
8. Maintenance 59
8.1. Safety instructions 59
8.2. Maintenance schedule 59
8.3. Cleaning the dividing knife and
dividing disc 61
8.4. Cleaning under the rounding table 62
8.5. Spare parts 62
9. Troubleshooting 63
9.1. Problems, causes and solutions 63
9.2. Errornotications 64
10. Taking out of operation 65
10.1. Disconnecting the machine 65
11. Disposal 66
11.1. Disposing of the machine 66