Daub DR Robot Variomatic - Machine Installation Guide; Safety Instructions for Installation; Unpacking and Initial Inspection; Machine Positioning and Placement

DR Robot Variomatic | User manual www.daub.nl48
5. INSTALLATION
5.1. Safety instructions
6
WARNING
Carefully read the safety instructions in section 3. before installing the machine. This will prevent
possible personal injury or damage to the machine.
5.2. Unpacking the machine
1. Make sure the packaging is upright.
2. Remove the box vertically.
3. Carefully unpack the machine.
4. Check the machine for transport damage.
ATTENTION
Ifyoundanydamage,informyourcarrierimmediately.Werecommendtakingphotosofthe
damage.
5.3. Positioning the machine
ATTENTION
Themachineshouldbeplacedonasolidandatoor.Themachineisverystable.Incaseofavery
slipperyoor,youcanblockthewheelsbyusingwedges.
5.3.1. Required tools
• Forklift
5.3.2. Instructions
1. Slide the forklift's fork under the base of the machine.
2. Lift the machine.
3. Drive to the desired location of the machine.
4. Lower the machine.
5. Remove the forklift's fork from under the base of the machine.