Daub DR Robot Variomatic - Machine Maintenance and Care; Safety Instructions for Maintenance; Routine Maintenance Schedule

DR Robot Variomatic | User manual www.daub.nl59
8. MAINTENANCE
8.1. Safety instructions
6
WARNING
• Carefully read the safety instructions in section 3. before servicing the machine. This will
prevent possible personal injury or damage to the machine.
• Onlyqualiedpersonnelmaycarryoutothermaintenanceonthemachine.
8.2. Maintenance schedule
8.2.1. Required tools
• Cold to lukewarm water
• Brush
• Damp cloth
• Plastic scraper
• Compressed air
• Grease
• Hydraulic oil
• Pipe spanner
8.2.2. Instructions
Frequency Instructions
Daily Clean all used rounding plates (do not forget to clean the
bottom as well) with cold to lukewarm water.
Do not store the rounding plates in the machine, but hang
them on the side brackets of the machine.
Clean the top of the rounding table with a brush, damp
cloth, plastic scraper or compressed air.
Weekly Clean the working area of the dividing disc, knife and
pressing ring (see section 8.3.) with a brush, damp cloth,
plastic scraper or compressed air.