Daub DR Robot Variomatic - Using the DR Robot Variomatic; Safety Instructions for Operation; Selecting and Setting Programs

DR Robot Variomatic | User manual www.daub.nl51
7. USE
7.1. Safety instructions
6
WARNING
Carefully read the safety instructions in section 3. before using the machine. This will prevent
possible personal injury or damage to the machine.
7.2. Selecting a program
1. Select a desired program using the -/+ key (15 and 16) or set the desired parameters according
to dough weight and consistency.
2. Suggestedsettingsforrst-timeuse:
• Rounding speed – middle position
• Rounding stroke ‘HI’
Setting Type 2/xx Type 3/xx Type 4/xx
0 750 900 1200
1 1110 1320 1550
2 1470 1740 1900
3 1830 2160 2250
4 2190 2580 2600
5 Max. Max. 2950
6
__ __
3300
7
__ __
3650
8
__ __
Max.
ATTENTION
• The selected mode determines how far the dividing disc moves up during rounding. In this way
the volume of the rounding chambers can be determined. Therefore this position is related to
the weight of the dough piece that should be divided.
• As the correct setting depends on the dough consistency, it is a question of experience.
• When the setting is too low, the dough pieces will be damaged. When the setting is too high,
theywillnotbesucientlyrounded.