To Next Page

To Previous Page

7 Upgrading a MicroVAX 3100 Model 30

Topics Covered in This Chapter ....................... 7–1

Upgrade Procedure ................................... 7–1

Step 1: If Your System Has Factory-Installed Drives ...... 7–1

Step 2: Shut Down System .......................... 7–2

Step 3: Disconnect Cables ........................... 7–2

Step 4: Remove System Cover ........................ 7–3

Step 5: Remove Fixed Disk Drives. . ................... 7–3

Step 6: Remove Removable-Media Drive ................ 7–4

Step 7: Set the SCSI IDs on the Drives ................. 7–4

Step 8: Install New Mounting Bracket ................. 7–5

Step 9: Complete the Upgrade ........................ 7–5

Step 10: Return Your MicroVAX System to Digital ........ 7–5

8 Upgrading a MicroVAX 3300/3400

Topics Covered in This Chapter ....................... 8–1

Upgrade Procedure ................................... 8–1

Step 1: Move Tabletop Enclosure . . . ................... 8–1

Step 2: Complete the Upgrade ........................ 8–1

Step 3: Return Your MicroVAX to Digital ............... 8–1

9 Upgrading a VAX 11/7xx, MicroVAX 2000, MicroVAX I and II,

DECsystem 5400

No Options Can Be Upgraded ........................ 9–1

Upgrade Procedure ................................... 9–1

Step 1: Return Your Current System to Digital . .......... 9–1

Step 2: Update Service Contract . . . ................... 9–1

10 Upgrading a MicroVAX 3100 Model 40/80/90, VAX 4000

Model 100

Topics Covered in This Chapter ....................... 10–1

Upgrade Procedure ................................... 10–1

Step 1: If Your System Has Factory-Installed Drives ...... 10–1

Step 2: Shut Down System .......................... 10–2

Step 3: Disconnect Cables ........................... 10–2

Step 4: Remove System Cover ........................ 10–2

Step 5: Remove Fixed Disk Drives. . ................... 10–3

Step 6: Remove the Upper Drive Shelf ................. 10–4

Step 7: Remove Removable-Media Drive ................ 10–4

DEC 2000 User Manual

Questions and Answers: