2
Upgrading a DECsystem 5000 Model
133/150
Topics Covered
in This Chapter
• Upgrading your system
• Removing drives
• Completing the upgrade
Upgrade Procedure
Step 1: If Your
System Has
Factory-Installed
Drives
If your DEC 2000 AXP system has factory-installed drives,
you may need to change the SCSI IDs on the drives you are
upgrading.
To display the SCSI ID settings of the drives in your system:
1. Enter the command to shut down the software and put the
system in console mode:
shutdown -h now
Upgrading a DECsystem 5000 Model 133/150 2–1
To Next Page
Loading...