Deif AGC-3 - CAN Bus Engine Communication (Option H7)

5.3.6 CAN bus engine communication (option H7)
Multi-line 2
CAN-H
A1 A2 A3
CAN-GND CAN-L
CAN-L
ECM
engine control module
CAN-GND CAN-H
120
120
Use shielded twisted cable.
End resistor R = 120 Ohm.
The terminating resistor at the engine side might not be needed, refer to the engine manufac-
turer’s literature.
AGC-3 installation instructions 4189340728
UK
Wirings
DEIF A/S Page 60 of 65