DLS / DLS-C Series
113
Cod.: 240.010.0042
DLS 300C DLS 450C DLS 600C
Protective devices
DC polarity reversal As standard
BATTERY polarity reversal As standard
BATTERY overload protection As standard
AC short-circuit protection As standard
Isolation monitoring unit As standard
Interface protection and anti-islanding In compliance with local legislation
RCMU (Residual Current Monitoring Unit) As standard
DC Overvoltage protective device As standard
AC Overvoltage protective device As standard
BATTERY Overvoltage protection As standard
Accessories supplied
DC connectors Quick connectors
AC connectors Screw terminals, M25 cable gland
BATTERY connection Screw terminals, PG9 cable gland
DC switch As standard
BATTERY automatic switch Built-in
User Interface Graphic Touch Screen 4.3’’ colour LCD
Communication interfaces USB / CAN Bus / RS485 / Ethernet / Wi-Fi
External alarm signal As standard
Datalogger Built-in
Warranties 5 years (as standard)/10 year (optional)
Environmental conditions
Ambient temperature -20°C…+60°C
Power derating temperature range 40°C…+60°C
Storage temperature -30°C…+70°C
Relative humidity 5%...95% without condensation
Noise levels < 50 dB(A) @ 1 m
Maximum operating altitude without derating 2000 m
Pollution degree classifcation PD 3
Installation environmental category Indoor, unconditioned
Physical
Protection rating IP 21
Overvoltage category (IEC 62109-1)
II (DC, BATTERY inputs)
III (AC output)
Cooling concept I-cool, forced cooling
Dimensions (W x H x D) mm 480 x 730 x 150
Weight 21 kg
Fitting system Staffa a parete
Safety
Protection class I
DC to AC isolation Trasformerless
BATTERY to AC and DC isolation with safety HF transformer
To Next Page
Loading...