Delios DLS 300 - EXPORT Menu

74
Cod.: 240.010.0042
DLS / DLS-C Series
2. "FW VERSION" - The page displays the rmware versions installed on the system:
Device FW Main inverter rmware
DSP A FW DSP A Firmware
DSP B FW DSP B Firmware
DSP C FW DSP C Firmware
Disp FW UI rmware
3. "NETWORKING" - The page displays the information of the local network to which the system is
connected:
LAN
IP Address
IP address assigned to the inverter within the local network
Netmask
Network Subnet mask
Gateway
Network Gateway
WLAN
SSID
Wi-Fi network ID accessed by the inverter
IP Address
IP address assigned to the inverter within the local network
Netmask
Network Subnet mask
Gateway
Network Gateway
Signal (dBm)
Signal strength
7.6 "EXPORT" Menu
Access to the "EXPORT" menu to export the data stored in the internal data-logger to an external USB
memory:
EXPORT
DATA
EVENTS
MENU
1. "DATI" - The page allows to access the system production data download function on an external
USB memory. Enter the start and end dates to dene the time period to download the data.
2. "EVENTI" - The page allows to access the download function of the events (alarm queue, parameter
modica-tion) recorded by the system on an external USB memory. Enter the start and end dates to
dene the time period to download the data.
Make sure to have connected an external USB memory before performing the export procedure. The ex-
ternal USB memory must be large enough and must have at least 128Mb of free space.