2. Gently push the bezel into place on the cabinet until it latches.
3. If the bezel has a key lock, lock the bezel with the provided key.
Figure 6 Installing the bezel
Closing the console
About this task
If you opened the console for access to the enclosure with the part you added or replaced, close
the console using the procedure that follows.
Procedure
1.
Grasp the free side of the console, and swing the console to the right to close it
2. Gently push on the console until it is closed.
LCC replacement
This section describes how to replace an LCC.
Removing a faulted LCC
Before you begin
Identify the faulted LCC by it amber fault LED.
FRU Removal and Replacement
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 21
To Next Page
Loading...
