Figure 30 Installing an LCC
Transferring disks and disk filler modules
Starting with the disk or disk filler module in slot 0, transfer disks and any disk filler modules one at
a time from the faulted enclosure to the replacement enclosure.
NOTICE Make sure to transfer the disks and any disk filler modules to the same slots in the
replacement enclosure that they occupied in the faulted enclosure. Installing disks out of their
original order results in data unavailability, and possible data loss.
Removing a disk
About this task
Refer to Figure 31 on page 43 while performing the procedure that follows.
Replacing a 25-Slot Disk-Array Enclosure
42 Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide
To Next Page
Loading...
