Dell EMC FS25 - Disconnect Cables

# disk show state
Enclosure Disk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
22 23 24 25
---------
-------------------------------------------------------------------------
1 . . . .
2 s
F . . . . . . . . . . . . . . . . . . . . . . .
---------
-------------------------------------------------------------------------
Legend State Count
------ ---------------------------- -----
. In Use Disks 23
s Spare Disks 1
F Failed Disks 1
------ ---------------------------- -----
Total 25 disks
Disconnect cables
Procedure
1.
Remove each cable connected to the LCCs by gently pulling the connector latches to
release the cable from the connector.
Label each cable so you can easily identify where to reconnect.
Figure 18 Disconnect LCC cables
CL5983
2. On both power supplies, release the cable retention bail.
3. Disconnect both power cables.
Replacing a 25-Slot Disk-Array Enclosure
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 33