Dell EMC FS25 - Installing a Replacement Power;Cooling Module; Removing an AC Power;Cooling Module

Figure 15 Removing an AC power/cooling module
CL5984
2
1
Installing a replacement power/cooling module
Procedure
1.
Install the power/cooling module in the enclosure within two minutes:
a. Gently insert the power/cooling module into the enclosure, being sure that the module is
completely seated.
b. Press the latch in to secure the power/cooling module.
FRU Removal and Replacement
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 27