Dell EMC FS25 - Unplugging the Power Cord from an AC Power Supply;Cooling Module; Unplugging the Power Cord from a DC Power Supply;Cooling Module

2. On an AC power/cooling module, release the cable retention bail. and unplug the power
cord.
Figure 13 Unplugging the power cord from an AC power supply/cooling module
3. On a DC power/cooling module, pinch the spring releases on each side of the power cord
plug and pull the plug out of the connector.
Figure 14 Unplugging the power cord from a DC power supply/cooling module
Spring
Release
CL5060
4. Remove the power/cooling module as follows:
a.
Press the orange handle button to release the module.
b. Pull the latch outward and remove the power/cooling module from its slot.
CAUTION To protect a running system from overheating, the enclosure will power
down unless you replace the power cooling module within two minutes.
FRU Removal and Replacement
26 Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide