Dell EMC FS25 - Sliding the Enclosure Onto the Rails; Rail Tabs Securing the Rear of the Enclosure

Figure 24 Sliding the enclosure onto the rails
CL4722
When the enclosure slides to the back of the cabinet, the rear tabs on the rails insert into
the notches in the rear of the enclosure. The tabs secure and support the rear of the
enclosure.
Figure 25 Rail tabs securing the rear of the enclosure
CL5994
2. Secure the front of the enclosure to the front vertical channels with four screws (two per
side), but do not tighten the screws until they are all in place.
Replacing a 25-Slot Disk-Array Enclosure
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 37