2. Press the orange handle buttons to release the LCC, pull the latches outward, and remove
the LCC from its slot.
Figure 29 Removing an LCC
Installing an LCC
Procedure
1.
Pull out the latches on the LCC and make sure they stay in the open position.
2. Align the LCC with the enclosure opening and gently push the LCC straight into the
enclosure, being sure the LCC is completely seated in the enclosure.
3. Press the latches to secure the LCC.
Replacing a 25-Slot Disk-Array Enclosure
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 41
To Next Page
Loading...
