Figure 17 Plug in the power cord
3. For a DC power/cooling module, push the power cord plug into the connector until it snaps
in place.
Complete the procedure
Procedure
1. Return the failed or replaced part(s) to Dell EMC. Reuse the packaging from the new
part(s) and use the included prepaid waybill for shipping. Reference the RMA number on the
outside of the package.
2. Send an autosupport report from the system by entering the autosupport send
command.
FRU Removal and Replacement
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 29
To Next Page
Loading...
