Legend State Count
------ ---------------------------- -----
. In Use Disks 23
s Spare Disks 1
R Rebuilding Disks 1
------ ---------------------------- -----
Total 19 disks
Note: When the amber fault light has turned off on the front panel of the shelf, all the
disk are in good state.
3. After the rescan, if the output of the disk show state command displays any disks in
the Unkown, Failed, or Absent states, run the disk unfail <enclosure-id>.<disk-
id> command to unfail the disk. For example, to unfail enclosure 2, disk 2, type disk
unfail 2.2.
Replacing a 25-Slot Disk-Array Enclosure
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide 49
To Next Page
Loading...
