Card type Slot priority Form factor
rNDC (Broadcom) Integrated Slot NONE
rNDC (Intel) Integrated Slot NONE
rNDC (Mellanox) Integrated Slot NONE
rNDC (QLogic) Integrated Slot NONE
Removing an expansion card riser
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Disconnect any cables connected to the expansion card.
Step
Hold the touch points, and lift the expansion card riser, from the riser connector, on the system board.
Figure 55. Removing an expansion card riser 1A
102
Installing and removing system components
To Next Page
Loading...
