Dell EMC PowerEdge R440 - Internal PERC Riser; Removing the Internal PERC Riser

3 Follow the procedure listed in After working inside your system.
Internal PERC riser
The internal PERC riser has Harpoon-based Premium Performance tier oering that drives IOPs and enhanced SSD performance.
Removing the internal PERC riser
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the air shroud.
Steps
1 Open the cable guiding latch for easy access.
2 Lower the plunger.
3 Press the cable connector and disconnect the PERC cable from the backplane.
4 Hold the blue touch points and lift the internal PERC riser out of the system.
Figure 49. Removing internal PERC riser
5 Turn the internal riser so that the PERC card is facing up.
6 Press the cable connector and disconnect the cable connected to the internal PERC card.
92
Installing and removing system components