Removing a 2.5 inch drive from a 3.5 inch drive adapter
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Remove the 3.5 inch drive adapter from the 3.5 inch drive carrier.
NOTE: A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5 inch drive carrier.
Steps
1 Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5 inch drive adapter.
2 Remove the 2.5 inch drive from the 3.5 inch drive adapter.
Figure 32. Removing a 2.5 inch drive from a 3.5 inch drive adapter
Next step
Install a 2.5 inch drive into a 3.5 inch drive adapter.
Related links
Removing a 3.5 inch drive adapter from a 3.5 inch drive carrier
Installing a 2.5 inch drive into a 3.5 inch drive adapter
Installing a 2.5 inch drive into a 3.5 inch drive adapter
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Remove the 3.5 inch drive adapter from the 3.5 inch hot swappable drive carrier.
76
Installing and removing system components
To Next Page
Loading...
