Dell EMC PowerEdge R440 - Installing the M.2 SSD Module

Figure 69. Removing the M.2 SSD module
1 module connector (2) 2 screws (2)
3 module (2)
Next step
Install the M.2 SSD module.
Installing the M.2 SSD module
Prerequisite
1 Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the M.2 SSD module connectors with the connectors on the BOSS card.
2 Push the M.2 SSD module until the module is seated rmly on the BOSS card.
3 Secure the M.2 SSD module on the BOSS card with the retention straps and screws.
Installing and removing system components
111