Figure 106. Removing the system board
Next step
Install the system board.
Installing the system board
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Unpack the new system board assembly.
CAUTION
: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identication button while placing the system board into the chassis.
2 Holding the system board holder, align the connector on the system board with the slots on the back of the chassis and place the
system board in place.
3 Using a Phillips #2 screwdriver, replace the screws that secure the system board to the chassis.
142
Installing and removing system components
To Next Page
Loading...
