Figure 82. Cable routing - 10 x 2.5 hard drive backplane with NVMe
1
backplane 2 backplane expander
3 backplane power cable 4 backplane power cable
5 backplane expander signal cable 6 cable routing clip
7 power interposer board 8 expansion card riser
9 system board 10 internal riser
11 SAS cable (BP: SAS_B to expansion card riser) 12 SAS cable (BP: SAS_A to expansion card riser)
13 NVMe cable connector (BP: PCIe to internal riser) 14 NVMe cable connector (BP: PCIe to MB)
122 Installing and removing system components
To Next Page
Loading...
