Table 50. Config12-1: R1D+R2A+R3A+R4A(FL) (continued)
Agile Description Supplier Category Card Priority
KIT,CRD,NVME,1.6,HHHL,PM17
25B
SAMSUNG PCIE SSD 12200
KIT,CRD,NVME,3.2,HHHL,PM17
25B
SAMSUNG PCIE SSD 12300
KIT,CRD,NVME,6.4,HHHL,PM17
25B
SAMSUNG PCIE SSD 12400
KIT,CRD,NVME,1.6,HHHL,PM17
35
SAMSUNG PCIE SSD 12500
KIT,CRD,NVME,1.6,HHHL,PM17
35,O
SAMSUNG PCIE SSD 12600
KIT,CRD,NVME,3.2,HHHL,PM17
35
SAMSUNG PCIE SSD 12700
KIT,CRD,NVME,3.2,HHHL,PM17
35,O
SAMSUNG PCIE SSD 12800
KIT,CRD,NVME,6.4,HHHL,PM17
35
SAMSUNG PCIE SSD 12900
KIT,CRD,NVME,6.4,HHHL,PM17
35,O
SAMSUNG PCIE SSD 13000
KIT,CRD,NVME,750GB,HHHL,P
4800X
INTEL PCIE SSD 13100
Removing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions on page 46.
2. Follow the procedure listed in the Before working inside your system on page 47.
3. Disconnect any cables that are connected to the expansion card.
Steps
1. For Riser 1, loosen the captive screws on the riser.
a. Press the blue release tab and holding the edges lift the expansion card riser from the riser connector on the system board.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of
sequence.
Installing and removing system components 127
To Next Page
Loading...
