Dell EMC PowerEdge R7525 - Left Control Panel View; Left Control Panel Without Optional Idrac Quick Sync 2 Indicator; Left Control Panel with Optional Idrac Quick Sync 2 Indicator

Left control panel view
Figure 6. Left control panel without optional iDRAC Quick Sync 2 indicator
Figure 7. Left control panel with optional iDRAC Quick Sync 2 indicator
Table 3. Left control panel
Item Indicator, button, or
connector
Icon Description
1 Status LED indicators N/A
Indicates the status of the system. For more information, see the
Status LED indicators section.
2
System health and system
ID indicator
Indicates the system health. For more information, see the System
health and system ID indicator codes section.
3
iDRAC Quick Sync 2
wireless indicator (optional)
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can
also launch the virtual Keyboard, Video, and Mouse (KVM) viewer
and virtual Kernel-based Virtual Machine (KVM), on a supported
mobile device. For more information, see the Integrated Dell Remote
Access Controller User's Guide at www.dell.com/poweredgemanuals
NOTE: For more information about the indicator codes, see the System diagnostics and indicator codes section.
18 System overview