Dell EMC Unity Series Replacement Manual

Figure 3 Removing the front bezel
CL5216
Removing the DPE from the cabinet
NOTICE
Do NOT remove parts, such as SP assemblies or disks, from the faulted DPE before
removing the enclosure from the cabinet. Doing so greatly increases the risk of
returning a component to the wrong slot in the replacement enclosure, which can
result in data loss.
Field Replacement Procedure
12 Unity All Flash and Unity Hybrid Field Replacement Procedure

Dell EMC Unity Series Specifications

General

Snapshot Support	Yes
Storage Type	Hybrid Flash, All-Flash
Drive Support	SAS, SSD
Protocols	iSCSI, NFS, SMB
Data Services	Snapshots, Replication, Thin Provisioning, Deduplication, Compression
Management	Unisphere, REST API, CLI
Data Reduction Features	Deduplication, Compression
High Availability	Redundant components
Redundancy	power supplies, fans
RAID Levels Supported	RAID 5, RAID 6, RAID 10
Replication Support	Yes
Cloud Tiering	Yes
Security Features	Encryption at rest, secure erase, role-based access control
Model	Dell EMC Unity Series