Steps
1. Slide and insert the hard-drive assembly into the external flexbay slot.
2. Close the release latch to secure the hard-drive assembly in place.
Next steps
1. Follow the procedure in After working inside your computer.
Removing a 3.5-inch hard-drive from a hard-drive assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the hard-drive assembly
About this task
The following images indicate the location of a 3.5-inch hard-drive in a hard-drive assembly and provide a visual representation
of the removal procedure.
Removing and installing components
21
To Next Page
Loading...
