2. At an angle, slide the processor on the CPU carrier.
3. Push the processor gently and lock the processor to the securing clips on the CPU carrier.
Next steps
1. Install the heat-sink assembly.
2. Install the side cover.
3. Follow the procedure in After working inside your computer.
Expansion card
Removing the powered graphics-card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the powered graphics-card and provide a visual representation of the removal
procedure.
68
Removing and installing components
To Next Page
Loading...
