3. Follow the procedure in After working inside your computer.
Removing the non-powered graphics card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the non-powered graphics card and provide a visual representation of the removal
procedure.
Steps
1. Push the PCIe latch to open the PCIe door.
2. Lift the graphics card away from the graphics-card slot.
Installing the non-powered graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the non-powered graphics card and provide a visual representation of the
installation procedure.
Removing and installing components
71
To Next Page
Loading...
