Dell G5 5090 - Page 52

2. Remove the left-side cover.
3. Remove the light bar.
4. Remove the front cover
5. Remove the memory modules.
6. Remove the wireless card.
7. Remove the solid-state drive/Intel Optane.
8. Remove the graphics card.
9. Remove the coin-cell battery.
10. Remove the processor fan and heat-sink assembly.
11. Remove the processor.
12. Remove the LED daughter board.
About this task
Figure 3. System-board components
1. wireless-card slot
2. hard-drive data cable connector (SATA0)
3. hard-drive power cable connector (SATA PWR)
4. coin-cell battery
5. power-supply unit cable connector
6. graphics-card slot
52
Removing and installing components