182 Mini Tower Computer Parts
11
Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 79).
Installing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 143.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 147).
3
Remove the bezel (see "Removing the Bezel" on page 165).
4
If you are replacing a floppy drive, remove the shoulder screws from the
existing drive and attach the screws to the replacement drive.
5
If you are installing a new floppy drive:
a
Remove the drive-panel insert for your new drive (see "Drive-Panel
Inserts" on page 178).
b
Remove the shoulder screws from the inside of the drive-panel insert.
c
Attach the screws to the new drive.
6
Align the shoulder screws on the floppy drive with the shoulder screw slots,
and gently slide the drive into the bay until it clicks into place.
To Next Page
Loading...
