System Setup 81
Processor Info Identifies the Processor Type, Processor Clock Speed,
Processor Bus Speed, Processor L2 Cache size, and
Processor ID. States whether the processor is
Hyperthreading and Multiple Core capable and
whether it supports 64-bit Technology. None of these
fields can be modified.
Memory Info Lists the Installed Memory size, Memory Speed,
Memory Channel Mode (dual or single), Memory
Technology, and memory slot information of installed
memory. For each populated memory slot, System
Setup lists the DIMM Size, ECC support, Rank, Ty p e ,
and Organization. Empty memory slots are denoted as
"Empty." None of these fields can be modified.
PCI Info Identifies any installed PCI or PCI Express cards and
their respective Slot ID. None of these fields can be
modified.
Date/Time Displays current date and time settings.
Boot Sequence The computer attempts to boot from the sequence of
devices specified in this list. This option allows you to
control/modify the boot sequence (see "Boot Sequence"
on page 88).
Drives
Diskette Drive
• With diskette drive :
Internal
is default
• Without diskette drive :
USB
is default.
This option enables or disables the floppy drive. The
options are Off, Internal, USB, and Read Only.
NOTE: If USB is selected, ensure that the USB Controller
setup option under Onboard Devices is set to On.
SATA 0 through
SATA n
Identifies and enables and disables the drives attached
to the SATA connectors on the system board and lists
the capacities for the hard drives.
To Next Page
Loading...
