82 System Setup
SATA Operation
(
RAID
Autodetect/AHCI
default)
Options for Mini Tower and Desktop:
• RAID Autodetect/AHCI (RAID if signed drives,
otherwise AHCI)
• RAID Autodetect/ATA (RAID if signed drives,
otherwise ATA)
• RAID On (SATA is configured for RAID on every boot)
NOTE: When in Autodetect mode, the system configures
the drive as RAID if a RAID signature is detected on the
drive. Otherwise the drive will be configured as AHCI or
ATA.
SMART Reporting
(
Off default)
This setting determines whether integrated drive errors
are reported or not during system startup.
Onboard Devices
Integrated NIC
(
On default)
Enables or disables the integrated NIC controller.
Settings
are
Off, On, On w/ PXE, or On w/RPL. When the On
w/ PXE or On w/RPL setting is active, if a boot routine is
not available from the network server, the computer
attempts to boot from the next device in the boot sequence
list.
Integrated Audio
(
On default)
Enables or disables the onboard audio controller.
USB Controller
(
On default)
Enables or disables the internal USB controller. No Boot
enables the controller but disables the ability to boot
from a USB device.
NOTE: Operating systems with USB support will
recognize USB floppy drives regardless of the No Boot
setting.
Front USB
(On default)
Enables or disables the front USB ports.
PCI Slots
(On default)
Enables or disables all PCI slots.
To Next Page
Loading...
