Figure 55. Removing the metal brackets to install the full-length expansion cards
1 memory riser and fan cage 2 left metal bracket
3 right metal bracket
Figure 56. Installing the expansion card from the right expansion card riser
1
expansion card riser 2 expansion card connector on the riser
3 expansion card latch 4 expansion card
Next steps
1 Install the expansion card riser.
2 Connect the cables to the expansion card.
3 Follow the procedure listed in the After working inside your system section.
4 Install any device drivers required for the card as described in the documentation for the card.
114
Installing and removing system components
To Next Page
Loading...
